Removing multi-function control unit

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengage multi-function control unit -1- (-a- ) and pull it to the rear and out of the holder -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release electric plug connections -1- (-a- ) and disconnect them from the multi-function control unit -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release electric plug connections -1- (-a- ) and disconnect them from the multi-function control unit -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.