Installing control unit for ParkAssist

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

Installation is performed in reverse order to removal.
Tighten fastening nuts used to secure the ParkAssist control unit to the body. Tightening torque 3 Nm (2 ft lb.)