LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 767 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 917019 Removing and installing control unit for Lane Change Assist >> Installing control unit for Lane Change Assist

Installing control unit for Lane Change Assist

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws for Lane Change Assist control unit on the retaining strip. Tightening torque 3 Nm (2 ft lb.) 
scientia non olet · About LEMON Manuals