Installing loudspeaker booster

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Incorrect handling of optical waveguides

Risk of damage to optical waveguide

→ Observe the requirements for working with and installing optical waveguides.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

Installation is performed in reverse order to removal.
Tighten fastening screws securing loudspeaker booster to holder. Tightening torque 6 Nm (4.5 ft lb.)