Removing reversing camera
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove wire harness -1- from holders -2- .
- Cut and remove the tie-wraps -3-
.
- Release electric plug connections -1-
(-a-
) and disconnect them.
- Disengage locking mechanisms -1-
on the cap -2-
in direction of arrow and remove cap.
- Remove reversing camera -1-
from the bracket -2-
.
- Release bracket -1- if necessary -a- and press it to the rear and out of the rear apron.