LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 767 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 911019 Removing and installing PCM display and operator control unit >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install dashboard molding on passenger's side. → 705819 REMOVING AND INSTALLING DASHBOARD MOLDING ON PASSENGER'S SIDE - "INSTALLING"
  2. Install dashboard molding on driver's side at the right. → 70581902 REMOVING AND INSTALLING DASHBOARD MOLDING ON DRIVER'S SIDE AT THE RIGHT -"INSTALLING"
  3. If the PCM display and operator control unit was replaced, teach the new PCM display and operator control unit to suit the vehicle using PIWIS Tester II 9818  . → 911055 REPLACING PCM DISPLAY AND OPERATOR CONTROL UNIT 
scientia non olet · About LEMON Manuals