LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 767 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 911019 Removing and installing PCM display and operator control unit >> Installing PCM display and operator control unit

Installing PCM display and operator control unit

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws securing PCM display and operator control unit to the instrument panel. Tightening torque 4 Nm (3 ft lb.) 
scientia non olet · About LEMON Manuals