Re-calibrate Surround View camera control unit

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Software version programmed during calibration with PIWIS Tester test software version 34.500 (or higher) installed: 0275

Work Procedure:

Re-calibrate Surround View camera control unit. → 9172K2 CALIBRATING SURROUND VIEW CAMERA

Invoicing:

The work involved is invoiced under the labor operation:

91722540

Programming Surround View camera control units

-
-

For invoicing and documentation using PQIS, enter the following coding:

	91720	Surround View camera control unit
	1028	offset, rotated