Preparing window aperture for installation

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove adhesive on the body.
Information
- The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution .
1. 1.1. When removing adhesive residue from the body using a cutter and flashing knife, ensure that a surface coating of adhesive remains.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean new paint areas or damaged paint surfaces in the non-visible area of the window aperture in the body with cleaning solution -H1- and coat with primer -H2- .

Information

A drying time of at least 10 minutes must be observed between cleaning the bonding surface and applying primer! Always ensure that no cleaning solution residues remain on the body .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.