Preparing rear window for installation: Notes

Information 

• The removed rear window can be reinstalled if there was no prior damage to the rear window and the rear window was removed without damage  .

Information 

• Replace the seal at the bottom of the rear window  .

1. Remove adhesive from the rear window.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   1. 1.1. Fit cutter -C-  with the flashing knife -D-  and remove adhesive residue from the rear window, ensuring that a surface coating of adhesive remains.

   Information 

   • The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution  .
2. Apply activator to the bonding section of the rear window.
   1. 2.1. During long idle periods, apply activator -H3-  to the remaining adhesive.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.