Removing front window channel seal

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The molding cannot be removed without damaging it irreparably and must always be replaced.

Open the front door window fully.
Carefully loosen window channel seal -1- from the sheetmetal flange using a plastic wedge.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull window channel seal -1- up off the sheetmetal flange, starting at the rear.
Remove window channel seal -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.