Applying coating
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The hydrophobic coating must not come into contact with water or other fluids for at least 30 minutes after applying the coating .
- Apply hydrophobic coating agent as a flat liquid film and rub immediately and uniformly with a paper towel.
- A grey fog forms on the treated surface following application. Polish off this grey fog completely using a new, dry and clean paper towel.
- The coating must not come into contact with water or other fluids for at least 30 minutes.
- Dried-on coating agent can be softened by rubbing it with the cloth soaked in coating agent and then wiping it off with a clean paper towel.