LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 764 (57 - Door Front, Central Locking System) >> WM 572619 Removing and installing lock peg >> Installing lock peg

Installing lock peg

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position lock peg and screw in the fastening screws. Locking clip - bend facing inside of vehicle.
  2. Carefully close door and check that the lock peg is positioned correctly with respect to the lock.
  3. Adjust the lock peg to suit the lock as required.
  4. Tighten fastening screws to Tightening torque 25 Nm (19 ft lb.)  until secure.
  5. Check position of doors and make adjustments if necessary. → 575115 ADJUSTING FRONT DOOR 
scientia non olet · About LEMON Manuals