Removing number plate light
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Switch off ignition and remove remote control before disconnecting or removing electrical load.
- Insert a screwdriver at the recess for the number plate light -1-
and press in direction of arrow, then remove the number plate light.
- Release plug connection -2- for number plate light -A- and pull it off -B- .