Installing headlight mounting
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
If work is carried out on the headlight or retainer plate, the installed fastening screws must be replaced by micro-encapsulated fastening screws (see PET).
Micro-encapsulated fastening screws must be tightened only once to the specified torque.
Micro-encapsulated fastening screws must be replaced after loosening them.
Left headlight mounting:
- Clip antenna line holder -1- into the headlight mounting -2- .
- Clip holders for electric plug connections -3-
and headlight cleaning system hose -4-
into the headlight mounting -2-
.
Headlight mounting at the left and right:
- Position headlight mounting -2-
on the adjusting elements.
- Fit fastening screws -1- .
- 4.1. Press fastening screw -1- into adjusting element.
- 4.2. Press headlight mounting -2- in the adjusting element area down - F- and screw fastening screw -1- into adjusting element.
- 4.3. Align markings on the headlight mounting -2- - if markings were made - with the washers, press headlight mounting -2- down in the adjusting element area - F- and tighten fastening screws -1- .