Subsequent work
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Install brake calliper → 473919 REMOVING AND INSTALLING FRONT BRAKE CALLIPER
.WARNING: Improper handling of fluid-carrying lines
- Escaping fluid
- System malfunction
- Risk of escaping fluid catching fire
→ Do not kink, crush or twist the line
→ Avoid torsion and shearing
→ Fit the line carefully
- Check line routing of brake hose -1-
.
When doing this, check that the brake hose -1- (as shown) is at its original position in the grommet -2- and is not touching the spring strut.
Information
New disc brake pads require a bedding-in time of approx. 200 km (125 miles)! Only then do they achieve their best friction coefficient and wear value! During this period, the brakes should only be subjected to full stress at high speed in emergencies!
- Position disc brake pads by operating the brake several times.
- Check the brake fluid level and correct it if necessary → 470801 CHECKING BRAKE FLUID LEVEL .
- Fit wheel. Use assembly aids (assembly pins) -1-
. → 440519 REMOVING AND INSTALLING WHEEL
.