Installing trailer hitch
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Always replace self-locking nuts and screws.
Information
- Another person is needed for removing and installing the trailer hitch because of its weight.
- Position trailer hitch, guide wire harness through the bodyshell, engage grommet and secure with fastening screws.
- Tighten trailer hitch to the specified tightening torque Tightening torque 50 Nm (37 ft lb.) until secure.
- Tighten trailer hitch to a torque angle of Torque angle 90° .