Removing side step: Notes

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Cover add-on parts and adjacent areas.

Protect components against scratching and damage.

Information

The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
Some steps must be carried out automatically.
Some of the repair illustrations show only one side of the vehicle.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew and remove fastening screws -1- securing the bottom of the step to the underbody.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclip step.

2.1. Unclip the step, starting from the rear -A- , using an assembly wedge and remove it -B- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.