LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 760 (66 - Exterior Equipment) >> WM 662619 Removing and installing side step (skidpad) >> Installing side step >> Installing support rail for step

Installing support rail for step

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Position support rail, starting at the front, and tighten fastening nuts at the front and rear to Tightening torque 6 Nm (4.5 ft lb.)  .
scientia non olet · About LEMON Manuals