Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for double clutch cover | Screw in evenly by hand/replace | Initial tightening | 1 Nm (0.5 ft. lb.) | ||
| Fastening screw for double clutch cover | Torque angle | +90° | |||
| Fastening screw for double clutch cover | Final tightening | +10 Nm (+7.5 ft. lb.) |