LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 757 (13 - Engine - CRANKGEAR, Pistons) >> WM 137619 Removing and installing pulley >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The lock carrier must be moved to service position  for better access in the engine compartment at the front. → 503809 LOOSENING AND SECURING LOCK CARRIER (SERVICE POSITION) .

  1. Remove the engine cover (design cover).
  2. Remove air box for throttle housing.

    243519 REMOVING AND INSTALLING AIR BOX FOR THROTTLE HOUSING (Y-PIPE AHEAD OF THROTTLE VALVE) .

  3. Remove drive belt.

    137819 REMOVING AND INSTALLING DRIVE BELT .