Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Fastening screw for drive plate |
M10 x 1 x 29 (10 ea.)/tighten screws in diagonally opposite sequence |
Initial tightening |
60 Nm (44 ft lb.) |
|
|
| Fastening screw for drive plate |
|
Final tightening |
+90° |
+/-10° |
|