LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 757 (13 - Engine - CRANKGEAR, Pistons) >> WM 136319 Removing and installing drive plate >> Installing drive plate

Installing drive plate

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install drive plate.
    1. 1.1. Position drive plate.
    2. 1.2. Fit new screws hand-tight.
    3. 1.3. Tighten screws in diagonally opposite sequence to Initial tightening 60 Nm (44 ft lb.)  .
    4. 1.4. Tighten screws in diagonally opposite sequence to Final tightening +90° +/-10°  .
    5. 1.5. Counter at the pulley.
scientia non olet · About LEMON Manuals