Installing flywheel
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The flywheel must not be tilted during removal and installation.
- Install flywheel.
- 1.1. Hold extractor Extractor T40176
at the top and counter at the bottom of the flywheel with your hand
- 1.2. Push flywheel onto the input shaft without tilting it.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Remove extractor Extractor T40176
from the flywheel.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|