Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting rod cap to connecting rod | M9 x 56; Step 1 tightening sequence as synchronous as possible; use new bolts | Tightening torque | 8 Nm (6 ft lb.) | ||
| Connecting rod cap to connecting rod | M9 x 56; Step 2 tightening sequence as synchronous as possible; use new bolts | Tightening torque | 20 Nm (15 ft lb.) | ||
| Connecting rod cap to connecting rod | M9 x 56; Step 3 tightening sequence as synchronous as possible; use new bolts | Tightening torque | 40 Nm (30 ft lb.) | ||
| Connecting rod cap to connecting rod | M9 x 56; Step 4 tightening sequence as synchronous as possible; use new bolts | Torque angle | 90° |