Removing control unit for rear-differential lock

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

Remove control unit for rear-differential lock -1- .

1.1. Disengage locking mechanisms -a- and swivel control unit for rear-differential lock out of the holder -b- .

1.2. Pull control unit for rear-differential lock forward out of the clips -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Release electric plug connection -1- (-a- ) and disconnect it from the rear-differential lock control unit -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.