Technical values: Overview
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing bearing bracket to center transmission housing | M8 x 40 (7 ea.)/use new aluminum screw | Initial tightening | 8 Nm (6 ft. lb.) | ||
| Fastening screw securing bearing bracket to center transmission housing | Final tightening | +120° | |||
| Fastening screw securing idler gear support to bearing bracket | M8 x 85 (2 ea.) | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Fastening screw securing pressure filter to transmission housing | M6 x 20 (3 ea.) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Screw on intermediate shaft | M26 x 1.5 x 29/replace | Tightening torque | 205 Nm (151.5 ft. lb.) | ||
| Screw on inner intermediate shaft | M26 x 1.5 x 29/replace | Tightening torque | 300 Nm (222 ft. lb.) | ||
| Fastening screw for left flanged shaft | M8 x 25 | Initial tightening | 15 Nm (11 ft. lb.) | ||
| Fastening screw securing left flanged shaft | Final tightening | 45° | |||
| Sealing sleeve to transmission housing | M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) |