LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 755 (38 - Automatic Transmission - Gears, Control) >> WM 387719 Removing and installing control mechanism for transmission >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ATF pan. → 375519 REMOVING AND INSTALLING ATF PAN
  2. Top up ATF. → 370235 CHECKING AND TOPPING UP ATF
  3. Connect the battery. → 270619 REMOVING AND INSTALLING BATTERY
  4. Calibration after removing and installing the control mechanism: 

    Calibrate control mechanism for transmission using the PIWIS Tester  .

    1. 4.1. Overview → PDK → Maintenance/repairs → Calibration after removing and installing  mechatronics → [F12]
    2. 4.2. Follow the instructions on the PIWIS Tester  → [F12].
    3. 4.3. Start the calibration process by pressing [F8].
    4. 4.4. Erase the fault memory.
scientia non olet · About LEMON Manuals