Technical values: Overview

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION

Location	Description	Type	Basic value
Fastening screw for starter (on engine side)		Tightening torque	65 Nm (48 ft. lb.)
Fastening screw for starter (on transmission side)	Step 1	Tightening torque	30 Nm (22 ft. lb.)
Fastening screw for starter (on transmission side)	Step 2	Torque angle	+105°
Fastening nut securing B+ wiring harness to starter		Tightening torque	15 Nm (11 ft. lb.)
Fastening screw	Retaining bracket for engine mount	Tightening torque	30 Nm (22 ft. lb.)
Fastening screw	Engine support	Tightening torque	40 Nm (30 ft. lb.)
Fastening screw	Heat shield	Tightening torque	10 Nm (7.5 ft. lb.)
Fastening screws	Step 1, engine mount	Tightening torque	90 Nm (67 ft. lb.)
Fastening screw	Step 2, engine mount	Torque angle	+90°
Fastening screw	Front-axle carrier to engine mount	Tightening torque	55 Nm (41 ft. lb.)
ATF filter housing cover		Tightening torque	8 Nm (6 ft. lb.)
Fastening screw	ATF lines to ATF filter housing	Tightening torque	20 Nm (15 ft. lb.)
Fastening screw	ATF filter housing to transmission	Tightening torque	10 Nm (7.5 ft. lb.)
Fastening screw securing connection piece for ATF lines to transmission	M8 x 25	Tightening torque	20 Nm (15 ft. lb.)
Fastening screw	ATF line to transmission	Tightening torque	8 Nm (6 ft. lb.)
Fastening screw	Holder	Tightening torque	8 Nm (6 ft. lb.)
Fastening screw	Holder to valve cover	Tightening torque	8 Nm (6 ft. lb.)
Fastening screws	ATF lines to radiator	Tightening torque	5 Nm (3.5 ft. lb.)
Installation dimension of anti-chafing element on ATF lines		Adjustment value	35 mm