Removing ATF pump
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
In the description below, the individual pumps with the part identifier 3856 ATF pump
are differentiated by the terms oil pump
and sucking jet pump
.
- Wrap adhesive tape around the splines of the outer drive shaft so that the inner sealing face of the sucking jet pump is not damaged during removal and installation.
- 1.1. Coat affixed adhesive tape with grease.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Unscrew screws and slide the oil pump on the drive shaft forward.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Remove ATF pump.
- 3.1. Unscrew the screws for the sucking jet pump at the back of the oil pump.
- 3.2. Pull oil pump and sucking jet pump off the drive shaft separately.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|