Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for sensor module | Tightening torque | 8 Nm (6 ft. lb.) | |||
| Fastening screw securing side shaft to all-wheel output shaft | M14 x1.5/replace | Initial tightening | 100 Nm (74 ft. lb.) | ||
| Fastening screw securing side shaft to all-wheel output shaft | Final tightening | +120° | +30° | ||
| Fastening screw securing center transmission housing to front transmission housing | Tighten in diagonally opposite sequence/replace | Initial tightening | 8 Nm (6 ft. lb.) | ||
| Fastening screw securing center transmission housing to front transmission housing | Continue to tighten in diagonally opposite sequence | Final tightening | +120° | ||
| Fastening screw securing transmission housing cover to center transmission housing | M8 x 43/replace | Initial tightening | 20 Nm (15 ft. lb.) | ||
| Fastening screw securing transmission housing cover to center transmission housing | M8 x 55/replace | Initial tightening | 15 Nm (11 ft. lb.) | ||
| Fastening screw securing transmission housing cover to center transmission housing | Final tightening | +90° | +/-20° |