Installing wire harness
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Install new wire harness.
- 1.1. Connect new wire harness.
- 1.2. Lock electric plug connection.
- 1.3. Tighten fastening screw -1-
. Tightening torque 8 Nm (6 ft. lb.)
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
- Tighten fastening screws. Tightening torque 8 Nm (6 ft. lb.)
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|