Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to anti-roll bar | AM10 thread/always use new screws and nuts following removal | Initial tightening | 40 Nm (30 ft. lb.) | ||
| Connecting link to anti-roll bar | AM10 thread/always use new screws and nuts following removal | Final tightening | +90° | ||
| Anti-roll bar clamp to front-axle carrier | M8 thread/always use new nut following removal | Tightening torque | 30 Nm (22 ft. lb.) |