Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Wheel bearing to wheel bearing housing | M12 x 1.5 x 45 thread/observe installation sequence!/always use new screws or bolts following removal | Initial tightening | 80 Nm (59 ft. lb.) | ||
| Wheel bearing to wheel bearing housing | M12 x 1.5 x 45 thread/observe installation sequence!/always use new screws or bolts following removal | Final tightening | +90° |