Preliminary work
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove front drive shaft → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT .
- Insert both joint pins for the upper trailing arms -2-
in the wheel bearing housing and fit screw -1-
. This is necessary in order to prevent damage to chassis components when loosening and tightening the fastening screws on the wheel bearing unit.
- Remove brake disc → 465019 REMOVING AND INSTALLING FRONT BRAKE DISC .
- Remove front speed sensor → 451155 REPLACING FRONT SPEED SENSOR .