Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Torque support to body and cylinder head cover |
|
Final tightening |
180° |
|
|
| Torque support to body and cylinder head cover |
Always use new aluminum screws |
Initial tightening |
20 Nm (15 ft lb.) |
|
|