LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (10 - Engine - Crankcase, Suspension) >> WM 103719 Removing and installing torque support >> Installing torque support

Installing torque support

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
    1. 1.1. Use new aluminum screws and nuts.
    2. 1.2. Tightening torque for securing torque support to bracket: Initial tightening 20 Nm (15 ft lb.) Final tightening 180° 
scientia non olet · About LEMON Manuals