Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing engine mount to bracket | M12 x 1.5 x 60/replace | Initial tightening | 90 Nm (67 ft lb.) | ||
| Fastening screw securing engine mount to bracket | Final tightening | +90° | |||
| Fastening screw securing engine mount to front-axle carrier | Observe specified sequence! | Tightening torque | 30 Nm (22 ft lb.) |