Installing front camera
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work .
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
- Do not touch electric pins and plug contacts .
Information
Do not touch the front camera lens!
- Connect electric plug connection -1-
on the front camera -2-
(-a-
) until it engages securely.
- Install front camera.
- 2.1. Position front camera -1- on the holder in such a way that the two retaining pins at the left -a- and the retaining pin at the right -b- make contact with the mounting points.
- 2.2. Press front camera forward into the mounting points until the locks -2- engage securely.