Technical values: Overview
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing rear silencer to body | M8 | Tightening torque | 20 Nm (15 ft lb.) | ||
| Clamping sleeve, D65 | Tightening torque | 33 Nm (24 ft lb.) | +/-5 Nm (+/-3.5 ft lb.) | ||
| Fastening nut securing front silencer to catalytic converter | M8/replace | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw for catalytic converter support | M8 x 20 | Tightening torque | 23 Nm (17 ft lb.) | ||
| V-band clamp, 107 | Tightening torque | 13 Nm (9.5 ft lb.) | |||
| V-band clamp, 96 | Tightening torque | 13 Nm (9.5 ft lb.) | |||
| Fastening nuts securing intermediate pipe to turbocharger | MX | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw securing compression spring to tab | M8 x 50 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screws securing bracket to transmission | Tightening torque | 23 Nm (17 ft lb.) | |||
| Fastening screw securing rubber stop to bracket | M8 x 30 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw securing rear silencer at the rear to body | M8 x 40 | Tightening torque | 20 Nm (15 ft lb.) | ||
| Fastening screw securing tailpipe cover to tailpipe | M6 x 12 | Tightening torque | 8 Nm (6 ft lb.) | ||
| Fastening nut on connecting strut for rear silencer | M8 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening nut securing rear silencer to body | M8 | Tightening torque | 20 Nm (15 ft lb.) | ||
| Clamping sleeve, D65 | Tightening torque | 30 Nm (22 ft lb.) | +/-5 Nm (+/-3.5 ft lb.) | ||
| Fastening nut securing front silencer to catalytic converter | M8/replace | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw for catalytic converter support | M8 x 20 | Tightening torque | 23 Nm (17 ft lb.) | ||
| V-band clamp, 107 | Tightening torque | 13 Nm (9.5 ft lb.) | |||
| V-band clamp, 96 | Tightening torque | 13 Nm (9.5 ft lb.) | |||
| Fastening nuts securing intermediate pipe to turbocharger | MX | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw securing compression spring to tab | M8 x 50 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screws securing bracket to transmission | Tightening torque | 23 Nm (17 ft lb.) | |||
| Fastening screw securing rubber stop to bracket | M8 x 30 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Fastening screw securing rear silencer at the rear to body | M8 x 40 | Tightening torque | 20 Nm (15 ft lb.) | ||
| Fastening screw securing tailpipe cover to tailpipe | M6 x 12 | Tightening torque | 8 Nm (6 ft lb.) | ||
| Fastening nut on connecting strut for rear silencer | M8 | Tightening torque | 23 Nm (17 ft lb.) | ||
| Screw for exhaust flap actuator | Tightening torque | 5 Nm (3.5 ft lb.) |