Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Compressor to holder | M6 thread | Tightening torque | 8 Nm (6 ft lb.) | ||
| Valve unit to holder | M6 thread | Tightening torque | 4.5 Nm (3 ft lb.) | ||
| Compressor/valve unit holder to underbody | M8 thread | Tightening torque | 20 Nm (15 ft lb.) | ||
| Pressure lines to valve block | Union nuts | Tightening torque | 3.5 Nm (2.5 ft lb.) | ||
| Pressure line to compressor | Union nut | Tightening torque | 3.5 Nm (2.5 ft lb.) | ||
| Pressure accumulator to body | Tightening torque | 20 Nm (15 ft lb.) | |||
| Pressure line to pressure accumulator | Union nut | Tightening torque | 3.5 Nm (2.5 ft lb.) | ||
| Rear level sensor to holder | Tightening torque | 5 Nm (3.5 ft lb.) | |||
| Front level sensor to front-axle carrier | M8 thread | Tightening torque | 20 Nm (15 ft lb.) |