Technical values
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake line to brake master cylinder (left-hand drive) | Union nut | Tightening torque | 14 Nm (10.5 ft. lb.) | ||
| Brake line to brake master cylinder (right-hand drive) | Union nut | Tightening torque | 18 Nm (13 ft. lb.) | ||
| Brake line to hydraulic unit (left-hand drive) | All lines on hydraulic unit | Tightening torque | 14 Nm (10.5ft. lb.) | ||
| Brake line to hydraulic unit (right-hand drive) | Line: Brake calliper -hydraulic unit | Tightening torque | 14 Nm (10.5 ft. lb.) | ||
| Brake line to hydraulic unit (right-hand drive) | Line: Brake master cylinder - hydraulic unit | Tightening torque | 18 Nm (13 ft. lb.) | ||
| Pedals to body | Hexagon nut | Tightening torque | 9 Nm (6.5 ft. lb.) | ||
| Brake booster to pedals | 12 point socket | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Brake master cylinder to brake booster | Hexagon nut/always use new nuts following removal | Tightening torque | 49 Nm (36 ft. lb.) | ||
| Brake fluid reservoir to brake master cylinder | Tightening torque | 5 Nm (3.5 ft. lb.) | |||
| Vacuum pump to engine | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Bleeder screw on front brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ft. lb.) | ||
| Bleeder screw on rear brake calliper | Tightening torque | 10 Nm (7.5 ft. lb.) |