Preliminary work
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove engine. → 100119 REMOVING AND INSTALLING ENGINE
- Remove catalytic converter. → 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER
- Unscrew fastening screws -2-
and remove heat shield at the left -1-
.
- Unscrew fastening screws -2-
and remove heat shield at the right -1-
.
- Remove heat shields on the drive shaft at both sides.
Unscrew fastening screws and remove heat shields.
- Loosen drive shafts at both sides from the transmission. → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT
- Remove ATF lines. → 386219 REMOVING AND INSTALLING LINE FOR ATF COOLING