Installing wire harness for tailgate at the right
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- 1.1. Do not twist or entangle the individual strands of the wire harness for tailgate at the right.
- 1.2. Check that the wire harness is routed correctly and without tension so that no chafing occurs.
- 1.3. Connect all electric plug connections until they engage securely.
- 1.4. Lock all electric plug connections by hand using the manual slide lock.
- 1.5. Tighten fastening nut for the ground strap at the roof pillar. Tightening torque 9 Nm (6.5 ft. lb.)
- 1.6. Tighten fastening nut for the ground strap at the tailgate. Tightening torque 9 Nm (6.5 ft. lb.)
- 1.7. Tighten fastening screw for the ground strap at the tailgate. Tightening torque 9 Nm (6.5 ft. lb.)