Removing pedestrian protection
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment .
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant .
- Some steps must be carried out automatically .
- Some of the repair illustrations show only one side of the vehicle .
- Unclip wire harness -2- on pedestrian protection -4- .
- Unscrew top fastening screws -1- .
- Unscrew bottom fastening screws -3- .
- Remove pedestrian protection -4- by pulling it forward.