LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 747 (69 Occupant Protection/Personal Protection) >> WM 696819 Removing and installing occupant detection control unit >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pressure sensor mat. → 695619 REMOVING AND INSTALLING SEAT OCCUPANCY DETECTION 
  2. Install padding for right seat. → 741055 REPLACING PADDING FOR FRONT SEAT
  3. Install control unit for memory seat adjustment. → 729319 REMOVING AND INSTALLING CONTROL UNIT FOR MEMORY SEAT ADJUSTMENT
  4. Install right front seat. → 720119 REMOVING AND INSTALLING FRONT SEAT
  5. Connect the battery. Read and follow work instructions after disconnecting the battery. → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  6. If the occupant detection control unit was replaced, it must then be calibrated. → 696855 REPLACING OCCUPANT DETECTION CONTROL UNIT