LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 747 (69 Occupant Protection/Personal Protection) >> WM 696819 Removing and installing occupant detection control unit >> Removing occupant detection control unit

Removing occupant detection control unit

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
G12836177Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Release electric plug connection -1-  on the occupant detection control unit -a-  and disconnect it.
    G12836178Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully unclip occupant detection control unit -2, 3-  and remove control unit.
  3. Remove padding for right seat. → 741055 REPLACING PADDING FOR FRONT SEAT
  4. Remove pressure sensor mat. → 695619 REMOVING AND INSTALLING SEAT OCCUPANCY DETECTION SYSTEM 
scientia non olet · About LEMON Manuals