Installing rear three-point belt at the center
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Hook in seat-belt pretensioner -1-
so that the fixing pin -2-
is seated in the groove -3-
.
- Tighten fastening nut -1-
for rear seat-belt pretensioner at the center -2-
(Tightening torque 50 Nm (37 ft lb.)
).
- Tighten fastening screw -1- for center seat belt mount -2- on the body Tightening torque 55 Nm (41 ft lb.) .