Installing load-through provision
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Fold left and right backrest forward.
- Position load-through provision -1-
on the mount on the left and right from above.
- Position supporting bow -1- over the mounts and tighten securely Tightening torque 12 Nm (9 ft lb.) .
Information
Always replace the fastening screws on the seat assembly after customer service and reworking. Micro-self-locking or self-tapping screws must not be modified, greased or loosened and then screwed in again.