LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 746 (74 - Seat UPHOLSTERIES, Cover) >> WM 745219 Removing and installing padding for rear backrest >> Removing padding for rear backrest

Removing padding for rear backrest

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Only for left rear backrest:  Remove cover for belt.
    1. 1.1. Unclip cover for belt -1-  using a plastic wedge at the rear - A-  and pull it up and off - B-  .
      G12836381
    2. 1.2. Carefully pull cover for belt -1-  apart at the connection point - C-  and guide out the belt.
  2. Pull cover for backrest lock -1-  off the backrest -2-  .
    G12836382
  3. Pull off cover for backrest locking mechanism -1-  in an upward direction using a suitable tool (e.g. a hook) -2-  .
    G12836383
  4. Loosen cover piping -1-  all the way around (-A, B, C, D-  ) and remove it from the backrest -2-  . To do this, carefully open the retaining strip -3-  using a plastic wedge and pull out the cover piping -1-  .
    G12836384
  5. Remove padding with cover

Information 

Detach padding from the cover and secure it, see → 745255 REPLACING PADDING FOR REAR BACKREST 

scientia non olet · About LEMON Manuals